2015 Chrysler Town & Country Owner Manual - Page 35

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 The EVIC message stays active until the ignition is turned • For security, power window and power sunroof operation (if equipped) are disabled when the vehicle is to the ON/RUN position. in the Remote Start mode. To Enter Remote Start Mode • The engine can be started two times (15 minutes cycles) with the RKE transmitter. However, the igniPress and release the REMOTE START button tion switch must be cycled by pushing the START/ on the RKE transmitter twice within five secSTOP button twice (or the ignition switch must be onds. The vehicle doors will lock, the parking cycled to the ON/RUN position). lights will flash, and horn will chirp twice (if programmed). Then, the engine will start and the vehicle To Enter The Vehicle After Remote Start will remain in the Remote Start mode for a 15-minute To enter the vehicle while the engine is running during a cycle. Remote Start, you must first unlock the vehicle using the UNLOCK button on the RKE transmitter. After the NOTE: vehicle is unlocked, you can enter the vehicle, press and • If your power door locks were unlocked, Remote Start release the START/STOP button (or insert the Key Fob will automatically lock the doors. into the ignition switch and move it to the ON/RUN • The park lights will turn on and remain on during position). Otherwise, the engine will shut off at the end of 15-minute cycle. Remote Start mode. 2