2015 Chrysler Town & Country Owner Manual - Page 20

18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE VEHICLE SECURITY ALARM - IF EQUIPPED The Vehicle Security Alarm monitors the vehicle doors for unauthorized entry and the ignition switch for unau- To Arm The System thorized operation. When the alarm is activated, the Follow these steps to arm the Vehicle Security Alarm: interior switches for door locks, power sliding doors and power liftgate are disabled. The Vehicle Security Alarm 1. Make sure the vehicles ignition is cycled to the "OFF" position (refer to ЉStarting ProceduresЉ in ЉStarting provides both audible and visible signals. For the first And OperatingЉ for further information). three minutes, the headlights will turn on, the park lamps and/or turn signals will flash, Vehicle Security Light will • For vehicles equipped with Keyless Enter-N-Go™, flash repeatedly, and the horn will sound. For an addimake sure the vehicle ignition system is OFF. tional 15-minutes, only the headlights, park lamps • For vehicles not equipped with Keyless Enter-Nand/or turn signals and Vehicle Security Light will flash. Go™, make sure the vehicle ignition system is OFF Rearming Of The System and the key is physically removed from the ignition. The Vehicle Security Alarm will rearm itself after the 15 2. Perform one of the following methods to lock the additional minutes of headlights and Vehicle Security vehicle: Light flashing if the Vehicle Security Alarm has not been • Push LOCK on the interior power door lock switch disabled. If the condition which initiated the alarm is still with the driver and/or passenger door open. present, the Vehicle Security Alarm will ignore that condition and monitor the remaining doors and ignition.