2015 Chrysler Town & Country Owner Manual - Page 640

638 MAINTAINING YOUR VEHICLE Fill the reservoir with windshield washer solvent (not with water as directed on the container, aids cleaning radiator antifreeze) and operate the system for a few action, reduces the freezing point to avoid line clogging, seconds to flush out any residual water. and is not harmful to paint or trim. The washer fluid reservoir will hold a full gallon of fluid Cooling System when the Low Washer Fluid Light illuminates. WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. After the engine has warmed, operate the defroster for a few minutes to reduce the possibility of smearing or freezing the fluid on the cold windshield. MOPAR® All Weather Windshield Washer Solution or equivalent, used WARNING! • When working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot.