2015 Chrysler Town & Country Owner Manual - Page 225

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 NOTE: Before programming your RKE transmitters you 4. Press and release button (1) or (2) accordingly. must select the "RKE Linked To Memory" feature "Memory Profile Set" (1 or 2) will display in the through the Electronic Vehicle Information Center instrument cluster. (EVIC). Refer to "Electronic Vehicle Information Center 5. Press and release the LOCK button on the RKE (EVIC) " in "Understanding Your Instrument Panel" for transmitter within 10 seconds. further information. NOTE: Your RKE transmitters can be unlinked to your To program your RKE transmitters, perform the followmemory settings by pressing the SET (S) button, and ing: within 10 seconds, followed by pressing the UNLOCK 1. Cycle the vehicles ignition to the OFF position. button on the RKE transmitter. 2. Select a desired memory profile (1) or (2). Memory Position Recall NOTE: If a memory profile has not already been set, NOTE: The vehicle must be in PARK to recall memory refer to ЉProgramming The Memory FeatureЉ in this positions. If a recall is attempted when the vehicle is not section for instructions on how to set a memory profile. in PARK, a message will be displayed in the EVIC. 3. Once the profile has been recalled, press and release To recall the memory settings for driver one, press MEMORY button 1 on the driver's door or the UNLOCK the SET (S) button on the memory switch. button on the RKE transmitter linked to memory position 1. 3