2012 Dodge Caliber Owner Manual - Page 107

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • When prompted, after the beep, say "Pair a Device" and follow the audible prompts. • You will be asked to say a four-digit Personal Identification Number (PIN), which you will later need to enter into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN after the initial pairing process. phone to use if multiple mobile phones are in the vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the Uconnect™ Phone will use the priority three mobile phone when you make a call. You can select to use a lower priority mobile phone at any time (refer to "Advanced Phone Connectivity" in this section). 3 Dial By Saying A Number • For identification purposes, you will be prompted to button to begin. give the Uconnect™ Phone a name for your mobile • Press the phone. Each mobile phone that is paired should be • After the "Ready" prompt and the following beep, say given a unique phone name. "Dial". • You will then be asked to give your mobile phone a • The system will prompt you to say the number you priority level between one and seven, with one being want to call. the highest priority. You can pair up to seven mobile • For example, you can say "234-567-8901". phones to your Uconnect™ Phone. However, at any given time, only one mobile phone can be in use, • The Uconnect™ Phone will confirm the phone number and then dial. The number will appear in the display connected to your Uconnect™ System. The priority of certain radios. allows the Uconnect™ Phone to know which mobile