2012 Dodge Caliber Owner Manual - Page 35

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 3. Within 30 seconds, press the power door UNLOCK Automatic Unlock Doors On Exit Programming The Automatic Unlock Doors On Exit feature can be switch to unlock the doors. enabled or disabled as follows: 4. A single chime will indicate the completion of the • For vehicles equipped with the EVIC, refer to "Elec- programming. tronic Vehicle Information Center (EVIC)/Personal 5. Repeat these steps if you want to return this feature to Settings (Customer-Programmable Features)" in "Units previous setting. derstanding Your Instrument Panel" for further inforNOTE: mation. • If you do not hear the chime it means that the system • For vehicles not equipped with the EVIC, perform the did not enter the programming mode and you will following procedure: need to repeat the procedure. 1. Close all doors and place the key in the ignition. • Use the Automatic Unlock Doors On Exit feature in accordance with local laws. 2. Within 15 seconds, cycle the ignition switch between LOCK and ON/RUN and then back to LOCK five times ending up in the ON/RUN position (do not start the engine). 2