2012 Dodge Caliber Owner Manual - Page 25

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 3. Test the feature while outside of the vehicle by press- • For vehicles equipped with the EVIC, refer to "Elecing the LOCK button on the RKE transmitter with the tronic Vehicle Information Center (EVIC)/Personal ignition switch in the LOCK position and the key reSettings (Customer-Programmable Features)" in "Unmoved. derstanding Your Instrument Panel" for further information. 4. Repeat these steps if you want to return this feature to • For vehicles not equipped with the EVIC, perform the its previous setting. following steps: NOTE: Pressing the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle 1. Press and hold the UNLOCK button on a programmed Security Alarm. Opening a door with the Vehicle Security RKE transmitter for at least 4 seconds, but no longer than Alarm activated will cause the alarm to sound. Press the 10 seconds. Then, press and hold the LOCK button while UNLOCK button to deactivate the Vehicle Security still holding the UNLOCK button. Alarm. 2. Release both buttons at the same time. Flash Lights With Remote Key Lock/Unlock 3. Test the feature while outside of the vehicle by pressThis feature will cause the turn signal lights to flash when ing the LOCK/UNLOCK buttons on the RKE transmitter the doors are locked or unlocked with the RKE transmit- with the ignition switch in the LOCK position and the ter. This feature can be turned on or turned off. To change key removed. the current setting, proceed as follows: 2