2013 Ford Explorer Owner Manual Printing 4 - Page 100

Lighting 99 HEADLAMP EXIT DELAY You can set the delay time to keep the headlamps on for up to three minutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6 must be done within 10 seconds): 1. Turn the ignition off. 2. Turn the lighting control to the autolamp position. 3. Turn the lighting control to the off position. 4. Turn the ignition on. 5. Turn the ignition off. 6. Turn the lighting control to the autolamp position. The headlamps and parking lamps will turn on. 7. Turn the lighting control to the off position when the desired delay time has been reached. The headlamps and parking lamps will turn off. You can set the headlamp exit delay to one of the following settings: • Off • 10 seconds • 20 seconds • 30 seconds • 60 seconds • 90 seconds • 120 seconds • 180 seconds. Note: You can also adjust the time delay using the display controls in the instrument cluster. See the Information Displays chapter. 2013 Explorer (exp) Owners Guide gf, 4th Printing, November 2012 USA (fus)