2013 Ford Explorer Owner Manual Printing 4 - Page 99

98 AUTOLAMPS Lighting WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during daylight, and the headlamp control is in the autolamp position, the exterior lamps will turn on after a brief delay and will remain on until the wipers are turned off. The autolamp system provides light sensitive automatic on-off control of the exterior lights normally controlled by the headlamp control. The headlamps will remain on for a period of time after you switch the ignition off. You can adjust the time delay using the message center in the instrument cluster. See Information displays. INSTRUMENT LIGHTING DIMMER Press repeatedly or press and hold until the desired level is reached. Note: In the uplevel message center only, a message will pop up that will show incrementally where the dimmer is in relation to the dimming steps. These steps will also vary for daytime and night time dimming. Note: If the battery is disconnected, discharged, or a new battery is installed, the dimmer will set the illuminated components to the maximum setting automatically. 2013 Explorer (exp) Owners Guide gf, 4th Printing, November 2012 USA (fus)