2013 Ford Explorer Owner Manual Printing 4 - Page 271

270 Driving Aids System Settings The system has three optional setting menus available. To view or adjust them, select Settings > Vehicle Settings > Driver Assist > Lane Keeping Sys in the left-hand instrument cluster display using the OK button on the steering wheel. The last-known selection for each of these settings is stored by the system. You do not need to readjust your settings each time you turn on the system. Mode: This setting allows the driver to select which of the system features will be enabled and turned on when the button is pressed. • Alert only - Provides a steering wheel vibration when an unintended lane departure is detected. • Aid only - Provides a steering input toward the lane center when an unintended lane departure is detected. • Alert + Aid Sensitivity: This setting affects where in the lane a warning is provided (e.g. the increased sensitivity setting will move the warning zones in closer). This setting does not impact the aid mode. • Normal • Increased Intensity: This setting affects the intensity of the steering wheel vibration used for the alert mode. This setting does not impact the aid mode. • Low • Medium • High System Display When the system is turned on, an overhead graphic of a vehicle with lane markings will be displayed in the left-hand instrument cluster display. If the aid mode is selected when the system is switched on, arrows will be shown with the lane markings. When the system is turned off, the lane marking graphics will not be displayed. Note: The overhead vehicle graphic may still be displayed if adaptive cruise control is enabled. 2013 Explorer (exp) Owners Guide gf, 4th Printing, November 2012 USA (fus)