2013 Ford Explorer Owner Manual Printing 4 - Page 210

Starting and Stopping the Engine 209 Fast Restart The fast restart feature allows you to restart the engine within 20 seconds of switching it off, even if a valid key is not present. Within 20 seconds of switching the engine off, press the brake pedal and press the button. After 20 seconds have expired, you can no longer start the engine without the key present inside your vehicle. Once the engine has started, it remains running until you press the button, even if the system does not detect a valid key. If you open and close a door while the engine is running, the system searches for a valid key. You cannot start the engine if the system does not detect a valid key within 20 seconds. Your vehicle may have remote start capability. Refer to Remote start in the Keys and Remote Control chapter. STARTING A GASOLINE ENGINE When the engine starts, the idle RPM runs faster to warm the engine. If the engine idle speed does not slow down automatically, have the vehicle checked. Before starting the vehicle: • Make sure all occupants buckle their safety belts. • Make sure the headlamps and electrical accessories are off. • Make sure the parking brake is set. • Make sure the gearshift is in position P. • Turn the ignition on without starting the engine. Some warning lights will briefly illuminate. Note: Do not touch the accelerator pedal. 1. Fully press the brake pedal. 2. Select position P or N. 3. Start the engine. The engine may continue cranking for up to 15 seconds or until the vehicle starts. Note: If the engine does not start on the first try, wait for a short period of time and try again. If you have difficulty starting the engine when the temperature is below -13°F (-25°C), press the accelerator pedal slightly and try again. 2013 Explorer (exp) Owners Guide gf, 4th Printing, November 2012 USA (fus)