2013 Ford Explorer Owner Manual Printing 4 - Page 176

Seats 175 MEMORY FUNCTION (IF EQUIPPED) This memory control, located on the driver's door, allows automatic positioning of the driver seat, power mirrors, steering column (if equipped) and power adjustable foot pedals (if equipped) to three programmable positions. Programming a memory position Note: You can program a memory position at any time. • To program position 1, move the memory features to the desired positions using the associated controls. Press and hold button 1 for at least two seconds. A chime will sound confirming that a memory position has been set. • To program position 2 and 3, repeat the previous procedure using the respective buttons. Recalling a memory position You can recall a programmed memory position: • in any gearshift position if the ignition is not on. • only in position P or N if the ignition is on. Press the desired memory control to recall a memory position. Recalling memory positions with the remote control You can recall memory positions when you press unlock on your remote control (if the transmitter is programmed to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. If the easy entry feature is enabled, the seat will first move to the easy entry position. The seat will move to the final position when the key is in the ignition or when the push button start system (if equipped) is put in accessory mode or started. To program the memory feature to a remote control, see the Keys and Remote Control chapter. 2013 Explorer (exp) Owners Guide gf, 4th Printing, November 2012 USA (fus)