2014 Ford Escape Owner Manual Printing 2 - Page 228

Maintenance Replacing Tail, Brake and Turn Signal Bulbs 6. Remove the turn signal bulb or the tail and brake bulb by turning the bulb socket counterclockwise. Gently pull the bulb straight out of the socket. Install the new bulb in reverse order. 2 Replacing Reverse Lamp Assembly For bulb replacement, see your authorized dealer. Replacing License Plate Lamp Bulb 2 3 3 1 E142473 1. Make sure the headlamp control is in the off position and open the liftgate. 2. Remove the two bolt covers using a standard flat tip screwdriver. 3. Remove the two bolts from the lamp assembly. 4. Gently pull the lamp assembly away from the vehicle. E72789 1. Carefully release the spring clip. 2. Remove the lamp. 3. Remove the bulb. Reverse steps to reinstall bulb. Replacing High-Mount Brake Lamp Bulb Your vehicle is equipped with an LED center high-mount stop lamp located in the spoiler. It is designed to last the life of the vehicle. If replacement is required, see your authorized dealer. E142475 5. Disconnect the electrical connector. 225 Escape/Kuga (TM2)