2014 Ford Escape Owner Manual Printing 2 - Page 52

MyKey™ CREATING A MYKEY Use the information display to create a MyKey: 1. Insert the key you want to program into the ignition. If your vehicle is equipped with a push-button start, hold the intelligent access key next to the steering column. Details on the correct fob placement and position is in another chapter. See Starting and Stopping the Engine (page 123). 2. Switch the ignition on. 3. Access the main menu on the information display controls, and select Settings and then MyKey by pressing OK or the > button. 4. Press OK or the > button to select Create MyKey. 5. When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The key will be restricted at your vehicle's next start. MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys. You can also program configurable settings for the key(s). Refer to Programming/Changing Configurable Settings. 4. Press OK or > to make a selection. Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the engine off, however, you will need an admin key to change or clear your MyKey settings. CLEARING ALL MYKEYS You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys. Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once. To clear all MyKeys of all MyKey settings, use the information display to do the following: 1. Access the main menu and select Settings, then MyKey. 2. Scroll to Clear MyKey and press the OK button. 3. Hold the OK button until ALL MYKEYS CLEARED displays. CHECKING MYKEY SYSTEM STATUS You can find information about your programmed MyKeys by using the information display. MYKEY DISTANCE Tracks the distance when drivers use a MyKey. The only way to delete the accumulated distance is by using an admin key to clear your MyKey. If the distance does not accumulate as expected, then the intended user is not using the MyKey, or an admin key user recently cleared and then recreated a MyKey. Programming/Changing Configurable Settings Use the information display to access your configurable MyKey settings: Switch the ignition on using an admin key or fob. 2. Access the main menu on the information display controls, and select Settings, then MyKey by pressing OK or the > button. 3. Use the arrow buttons to get to a configurable feature. 49 1. Escape/Kuga (TM2)