2015 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 165

Starting and Stopping the Engine Vehicles with Keyless Start Note: Do not touch the accelerator pedal. Note: You must have your intelligent access key in the vehicle in order to shift the transmission out of position P. 1. Fully press the brake pedal. 2. Press the button. The system does not function if: • The key frequencies are jammed. • The key battery has no charge. If you are unable to start the engine, locate the backup slot (A) in one of two positions: Type One 2. If your vehicle is equipped with Type Two, make sure the buttons are facing the rear of the vehicle and the key ring up. Place the key into the backup slot. 3. With the key in this position, press the brake pedal, and then the button to switch on the engine. Fast Restart The fast restart feature allows you to restart the engine within 20 seconds of switching it off, even if a valid key is not present. Within 20 seconds of switching the engine off, press the brake pedal and press the button. After 20 seconds have expired, you can no longer restart the engine without the key present inside your vehicle. Once the engine has started, it remains running until you press the button, even if the system does not detect a valid key. If you open and close a door while the engine is running, the system searches for a valid key. You cannot restart the engine if the system does not detect a valid key within 20 seconds. E187576 Failure to Start If you cannot start the engine after three attempts, wait 10 seconds and follow this procedure: 1. Fully press the brake pedal. 2. Move the transmission selector lever to position P. 3. Fully press the accelerator pedal and hold it there. 4. Start the engine. Type Two E187577 1. If your vehicle is equipped with Type One, make sure to place the key properly into the backup slot. 162 F-150 (), enUSA, First Printing