2015 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 314
2015 Ford F150 SuperCrew Cab Manual
Page 314 highlights
Maintenance Headlamp Aiming Target A E165794 2. Press the wiper blade locking button (A) and separate the wiper blade from the wiper arm. 3. Install in the reverse order. Note: Make sure that the wiper blade locks into place. Lower the wiper arm and blade back on the windshield. Replace wiper blades at least once per year for optimum performance. You can improve poor wiper quality by cleaning the wiper blades and the windshield. E142592 A B C D 8 feet (2.4 meters). Center height of lamp to ground. 25 feet (7.6 meters). Horizontal reference line. Vertical Aim Adjustment 1. Park your vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.6 meters) away. 2. Measure the height from the center of your headlamp (indicated by a 3.0 millimeter circle on the lens) to the ground and mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall or screen at this height (a piece of masking tape works well). Note: To see a clearer light pattern for adjusting, you may want to block the light from one headlamp while adjusting the other. 3. Switch on the low beam headlamps to illuminate the wall or screen and open the hood. Cover one of the headlamps so no light hits the wall. ADJUSTING THE HEADLAMPS Vertical Aim Adjustment The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, contact an authorized dealer to check and realign your headlamps. 311 F-150 (), enUSA, First Printing