2015 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 220
2015 Ford F150 SuperCrew Cab Manual
Page 220 highlights
Cruise Control (If Equipped) Adaptive cruise control distance-between-vehicle settings Set speed mph ( km/h) Graphic display, bars indicated between vehicles Time gap, seconds Distance gap yd (m) Dynamic behavior 62 (100) 62 (100) 62 (100) 62 (100) 1 2 3 4 1 1.4 1.8 2.2 31 (28) 43 (39) 55 (50) 67 (61) Sport. Normal. Normal. Comfort. Each time you start the vehicle, the system selects the last chosen gap for the current driver. Changing the Set Speed • • Accelerate or brake to the desired speed, then press and release SET+. Press and hold SET+ or SET- until the desired set speed shows on the information display. The vehicle speed gradually changes to the selected speed. Press and release SET+ or SET-. The set speed changes in approximately 1.2 mph (2 km/h). Disengaging the System Press the brake pedal or press CNCL. The last set speed displays in grey but does not erase. Overriding the System WARNING Whenever you press the accelerator pedal and override the system, the system no longer automatically applies the brakes to maintain separation from any vehicle ahead. While you press the accelerator pedal, you override the set speed and gap distance. When you override the system, the green indicator light E144529 illuminates and the lead vehicle graphic does not show in the information display. The system resumes operation when you release the accelerator pedal. The vehicle speed decreases to the set speed, or to a lower speed if following a slower vehicle. • The system may apply the brakes to slow the vehicle to the new set speed. The set speed displays continuously in the information display while the system is active. Resuming the Set Speed Note: Only use resume if you are aware of the set speed and intend to return to it. Press and release RES. The vehicle returns to the previously set speed. The set speed shows continuously in the information display while the system is active. 217 F-150 (), enUSA, First Printing