2015 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 359

Wheels and Tires 4. Check that the tire lies flat against the frame and is properly tightened. Try to push or pull, then turn the tire to be sure it will not move. Loosen and retighten, if necessary. Failure to properly stow the spare tire may result in failure of the winch cable and loss of the tire. 5. Repeat this tightness check procedure when servicing the spare tire pressure (every six months, as per your scheduled maintenance information), or at any time that the spare tire is disturbed through service of other components. 6. If removed, install the spare tire lock into the bumper drive tube with the spare tire lock key and jack handle. Stowing the Jack and Tools 1. Place the jacking tools in the tool bag and secure the velcro flaps. E184021 2. Adjust the jack up or down by rotating the lead screw located on the end of the jack. The stowage markings should line up with the bottom channel. 3. Place the jack in the vehicle so that the lead screw adjustment is facing the driver side of the vehicle. 4. Place the tool bag on top of the jack. The jack base fits within the opening of the jack tool bag. 5. Attach the flap around the lead screw and secure the flap to the velcro. 6. Secure the two D-ring straps tightly. 7. Secure the velcro straps through the hole of the lead screw tightly. 8. Place the jack so the lug wrench faces the rear of the vehicle. Position the jack base so the key hole slots align with the jacking posts. 356 F-150 (), enUSA, First Printing