2015 Ford F150 SuperCrew Cab Owner Manual Printing 1 - Page 87

Lighting If equipped, the following also activate when the lighting control is in the autolamps position and you switch them on in the information display: • Configurable daytime running lamps. • Automatic high beam control. • Adaptive headlamp control. The headlamps remain on for a period of time after you switch the ignition off. Use the information display controls to adjust the period of time that the headlamps remain on. See Information Displays (page 105). Note: With the headlamps in the autolamps position, you cannot switch the high beam headlamps on until the autolamps system turns the low beam headlamps on. INSTRUMENT LIGHTING DIMMER Note: You disable the manual dimmer when you adjust the setting to Auto Dimming in the information display. See Information Displays (page 105). Note: If you disconnect the battery or it becomes discharged, the illuminated components will switch to the maximum setting. Windshield Wiper Activated Headlamps The windshield wiper activated headlamps turn on within 10 seconds when you switch the windshield wipers on and the lighting control is in the autolamps position. They turn off approximately 60 seconds after you switch the windshield wipers off. The headlamps will not turn on by wiper activation: • During a mist wipe. • When the wipers are on to clear washer fluid during a wash condition. • If the wipers are in intermittent mode. Note: If you switch autolamps and autowipers on, the headlamps will automatically turn on when the windshield wipers continuously operate. E161902 Press repeatedly or press and hold until you reach the desired level. 84 F-150 (), enUSA, First Printing