2003 Honda Accord Owner's Manual - Page 154

Audio System SCAN The SCAN function samples all the stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. The system will scan up the band for a station with a strong signal. When it finds one, it will stop and play that station for approximately five seconds. If you do nothing, the system will then scan for the next strong station and play that for five seconds. When it plays a station that you want to continue listening to, press the SCAN button again. You can store the Preset frequencies of your favorite radio stations in the three preset bars. Each bar will store two frequencies on the AM band, and four frequencies on the FM band. To store a frequency: 1. Select the desired band, AM or FM. FM1 and FM2 let you store two frequencies with each preset bar. 2. Use the TUNE, SEEK, or SCAN function to tune the radio to a desired station. 3. Pick the preset number (1 6) you want for that station. Press the left or right side of the bar and hold it until you hear a beep. 4. Repeat steps 1 to 3 to store a total of six stations on AM and twelve on FM. Once a station's frequency is stored, simply press and release the left or right side of the proper preset bar to tune to it. The preset frequencies will be lost if your car's battery goes dead, is disconnected, or the radio fuse is removed. 152 Comfort and Convenience Features