2003 Honda Accord Owner's Manual - Page 275

Engine Oil, Cooling System OIL FILTER 7. Replace the engine oil fill cap. Start the engine. The oil pressure indicator light should go out within five seconds. If it does not, turn off the engine and reinspect your work. 8. Let the engine run for several minutes, then check the drain bolt and oil filter for leaks. Adding Engine Coolant 6-cylinder models 6. Refill the engine with the recommended oil. Engine oil change capacity (including filter): (4-cylinder models) 4.4 US qt (4.2 ) (6-cylinder models) 4.5 US qt (4.3 ) 9. Turn off the engine, let it sit for several minutes, then check the oil level. If necessary, add oil to bring the level to the upper mark on the dipstick. 4-cylinder models RESERVE TANK Improper disposal of engine oil can be harmf ul to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container and take it to a recycling center. Do not discard it in a trash bin or dump it on the ground. If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks. The coolant you add should always be a mixture of 50 percent antifreeze and 50 percent water. Never add straight antifreeze or plain water. 272 Maintenance