2003 Honda Accord Owner's Manual - Page 319

Lights 6. Insert the new bulb into the hole and turn it one-quarter turn clockwise to lock it in place. 7. Push the electrical connector back onto the bulb. Make sure it is on all the way. 8. Turn on the headlights to test the new bulb. 9. Put the inner fender cover in place. Install the two holding clips. Lock each one in place by pushing on the center. 1. If you are changing the bulb on the passenger's side, start the engine, turn the steering wheel all the way to the left, and turn off the engine. If you are changing the bulb on the driver's side, turn the steering wheel to the right. 2. Use a flat-tipped screwdriver to remove the holding clips from the inner fender. 3. Pull the inner fender cover away from the fender and bumper. 4. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. Replacing a Front Turn Signal/ Parking Light Bulbs HOLDING CLIPS CONTINUED Maintenance 315