2003 Honda Accord Owner's Manual - Page 324

Lights 3. Pull the bulb straight out of its socket. Push the new bulb in until it bottoms in the socket. 4. Turn on the parking lights and check that the new bulb is working. 5. Put the lens back on the bulb holder and push it until it latches. 6. Slide the left side of the light assembly into the hole. Push on the right side to latch the assembly into place. Replacing Bulbs in the Interior Lights The ceiling light, door light and vanity mirror light come apart the same way, but they do not use the same type of bulb. 1. Remove the lens by carefully prying on the edge of the lens with a fingernail file or a small flat-tip screwdriver. Do not pry on the edge of the housing around the lens. Door light: Not available on DX model CEILING LIGHT BULB 2. Remove the bulb by pulling it straight out of its metal tabs. 3. Push the new bulb into the metal tabs. Carefully snap the lens back in place. Pry on the top left or right of the lens. Ceiling light: Pry on the front edge of the lens near both sides. Spotlights: Not available on DX model Pry on the inner edge of both spotlights. 320 Maintenance