2003 Honda Accord Owner's Manual - Page 340
2003 Honda Accord Manual
Page 340 highlights
Changing a Flat Tire EXTENSION JACKING POINT WHEEL WRENCH 9. Locate the jacking point nearest the tire you need to change. Place the jack under the jacking point. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 10.Use the extension and wheel wrench as shown to raise the car until the flat tire is off the ground. U.S. DX and LX models: Do not attempt to forcibly pry the wheel cover off with a screwdriver or other tool. The wheel cover cannot be removed without first removing the wheel nuts. 11.Remove the wheel nuts and flat tire. Temporarily place the flat tire on the ground with the outside surface of the wheel facing up. You could scratch the wheel if you put it face down. CONTINUED Taking Care of the Unexpected 337