2003 Honda Accord Owner's Manual - Page 318

Lights Low Beam Headlight BULB HOLDING CLIPS TAB 6-cylinder models 5. Push the electrical connector back onto the bulb. Make sure it is on all the way. 6. Turn on the headlights to test the new bulb. 7. (Passenger's side) Reinstall the air intake cover. Reinstall the two fasteners and secure them by pushing on the heads until they lock. 1. If you are changing the bulb on the passenger's side, start the engine, turn the steering wheel all the way to the left, and turn off the engine. If you are changing the bulb on the driver's side, turn the steering wheel to the right. 2. Use a flat-tipped screwdriver to remove the two holding clips from the inner fender. 3. Pull the inner fender cover away from the fender and bumper. 4. Remove the bulb by turning it approximately one-quarter turn counterclockwise. 5. Remove the electrical connector from the bulb by squeezing the connector to unlock the tab, then slide the connector off the bulb. 314 Maintenance