2015 Jeep Grand Cherokee Owner Manual SRT - Page 163

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 2. Adjust all memory profile settings to desired preferences Linking And Unlinking The Remote Keyless Entry (i.e., seat, side mirror, power tilt and telescopic steering Transmitter To Memory column [if equipped], and radio station presets). Your RKE transmitters can be programmed to recall one 3. Press and release the S (Set) button on the memory of two pre-programmed memory profiles by pressing the switch. UNLOCK button on the RKE transmitter. 4. Within five seconds, press and release either of the memory buttons (1) or (2). The Driver Information Display (DID) will display which memory position has been set. NOTE: NOTE: Before programming your RKE transmitters you must select the "Memory To FOB" feature through the Uconnect® system screen. Refer to "Uconnect® Settings " in "Understanding Your Instrument Panel" for further information. 3 To program your RKE transmitters, perform the follow• Memory profiles can be set without the vehicle in ing: PARK, but the vehicle must be in PARK to recall a 1. Cycle the vehicles ignition to the OFF position. memory profile. • To set a memory profile to your RKE transmitter, refer 2. Select a desired memory profile (1) or (2). to "Linking And Unlinking The Remote Keyless Entry NOTE: If a memory profile has not already been set, Transmitter To Memory" in this section. refer to ЉProgramming The Memory FeatureЉ in this section for instructions on how to set a memory profile.