2015 Jeep Grand Cherokee Owner Manual SRT - Page 540

538 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Installation NOTE: Inspect and clean the housing if dirt or debris is present before replacing the air filter element. 1. Install the air cleaner filter element into the housing assembly with the air cleaner filter inspection surface facing downward. 2. Install the air cleaner cover onto the housing assembly locating tabs. 3. Latch the spring clips and lock the air cleaner cover to the housing assembly. Accessory Drive Belt Inspection WARNING! (Continued) • When working near the radiator cooling fan, disconnect the fan motor lead. The fan is temperature controlled and can start at any time regardless of ignition switch position. You could be injured by the moving fan blades. • You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. When inspecting accessory drive belts, small cracks that run across ribbed surface of belt from rib to rib, are considered normal. These are not a reason to replace belt. However, cracks running along a rib (not across) are not WARNING! • Do not attempt to inspect an accessory drive belt with vehicle running. (Continued)