2015 Jeep Grand Cherokee Owner Manual SRT - Page 282

280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window. • Keep all objects a safe distance from the window. inside the vehicle plus that on the external rack does not exceed the maximum vehicle load capacity. To move the crossbars, loosen the attachments, located at the upper edge of each crossbar, approximately eight turns using the anti-theft wrench provided with the MOPAR® crossbars. Then, move the crossbar to the desired position, keeping the crossbars parallel to the ROOF LUGGAGE RACK - IF EQUIPPED rack frame. Once the crossbar is in the desired position, The crossbars and siderails are designed to carry the retighten the with the wrench to lock the crossbar into weight on vehicles equipped with a luggage rack. The position. load must not exceed 150 lbs (68 kg), and should be NOTE: uniformly distributed over the luggage rack crossbars. NOTE: If not equipped with crossbars, your authorized • To help control wind noise when the crossbars are not in use, place the front and rear crossbars approxidealer can order and install MOPAR® crossbars built mately 24 in (61 cm) apart. Optimal noise reduction specifically for this roof rack system. can then be achieved by adjusting the front crossbar Distribute cargo weight evenly on the roof rack crossbars. forward or aft using increments of 1 in (2.5 cm). The roof rack does not increase the total load carrying capacity of the vehicle. Be sure the total load of cargo