2015 Jeep Grand Cherokee Owner Manual SRT - Page 170

168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE detects vehicle specific light and automatically switches If the windshield or Automatic High Beam Headlamp from high beams to low beams until the approaching Control mirror is replaced, the mirror must be re-aimed vehicle is out of view. to ensure proper performance. See your local authorized dealer. NOTE: Daytime Running Lights - If Equipped • The Automatic High Beam Headlamp Control can be turned on or off using the Uconnect® System. Refer to The Daytime Running Lights (bright intensity) come on "Uconnect® Settings" in "Understanding Your Instru- whenever the engine is running, and the transmission is not in the PARK position. The lights will remain on until ment Panel" for further information. the ignition is switched to the OFF or ACC position or the • Broken, muddy, or obstructed headlights and taillights parking brake is engaged. of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, The headlight switch must be used for normal nighttime and other obstructions on the windshield or camera driving. lens will cause the system to function improperly. • To opt out of the Advanced Auto High-Beam Sensitivity Control (default) and enter Reduced High-Beam Sensitivity Control (not recommended), toggle highbeam lever 6 full on/off cycles within 10 seconds of ignition ON. System will return to default setting upon ignition off.