2005 Mazda MPV Owner's Manual - Page 114

Mazda MPV_8T50-EA-04G_Edition1 Page114 Monday, June 28 2004 3:59 PM Black plate (114,1) Knowing Your Mazda Security System qHow to Arm the System 1. Remove the key from the ignition switch. 2. Close the hood. Then close and lock all doors and the liftgate from the outside using the key. If you have the keyless entry system, press the lock button on the transmitter. The hazard warning lights will flash once to indicate that the system is armed. The following method will also arm the theft-deterrent system: Close the hood and the liftgate . Press the area on the door-lock switch marked "LOCK" once. Close all doors. NOTE l Insert the key into the ignition switch and turn it to the ON position. The hazard warning lights will flash twice to indicate that the system is turned off. qTo Stop an Alarm A triggered alarm can be turned off by any one of the following methods: l Unlock a door or the liftgate with the key. Press the unlock button on the keyless entry system transmitter. l NOTE Locking the doors with the inside doorlock knob will not arm the system. 3. The indicator light flashes once every 3 seconds to indicate that the system is fully armed. It continues to flash until the theft-deterrent system is turned off. If you have any problem with the theftdeterrent system, consult an Authorized Mazda Dealer. qTheft-Deterrent Labels qTo Turn off an Armed System An armed system can be turned off by any one of the following methods: l Labels indicating that your vehicle is equipped with a Theft-Deterrent System are in the glove box. Mazda recommends that you affix them to the lower rear corner of the front door windows. Unlock a door or the liftgate with the key. Press the unlock button on the keyless entry system transmitter. l 3-30 Form No.8T50-EA-04G