2005 Mazda MPV Owner's Manual - Page 267

Mazda MPV_8T50-EA-04G_Edition1 Page267 Monday, June 28 2004 4:0 PM Black plate (267,1) Maintenance and Care Owner Maintenance The quality designation SL, or ILSAC must be on the label. CAUTION 50 -30 -20 -10 0 10 20 30 40 Don't add engine oil over MAX. This may cause engine damage. 6. Make sure the O-ring on the dipstick is positioned properly before reinserting the dipstick. -20 0 20 40 60 80 100 120 5W-20 qChanging Engine Oil and Filter Change engine oil and filter according to Scheduled Maintenance (page 8-3). qInspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. 2. Warm up the engine to normal operating temperature. 3. Turn it off and wait at least 5 minutes for the oil to return to the oil pan. 4. Pull out the dipstick, wipe it clean, and reinsert it fully. Please act responsibly―protect the environment and take used oil to a recycling facility. Ask your dealer or a service station for information. WARNING Handling Used Engine Oil: Continuous contact with used engine oil is dangerous. It could cause skin cancer. Always wash with soap and water immediately after changing oil and filter. CAUTION Full OK Low Remove any oil splatter from the exhaust manifold, the exhaust pipe and the shield. Oil left on these areas will smoke when the engine is running. 5. Pull it out again and examine the level. It's OK between MIN and MAX. But if it's near or below MIN, add enough oil to bring the level to MAX. 8-11 Form No.8T50-EA-04G