2005 Mazda MPV Owner's Manual - Page 290

Mazda MPV_8T50-EA-04G_Edition1 Page290 Monday, June 28 2004 4:0 PM Black plate (290,1) Maintenance and Care Owner Maintenance 2. Push the tab as shown in the figure, and then remove the high-mount brake light unit. License plate lights 1. Slide the unit as shown in the figure to remove it. 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconnect the bulb from the socket. 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconnect the bulb from the socket. 4. Install the new bulb in the reverse order of removal. qReplacing Interior Light Bulbs Overhead light/Map lights 1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the screwdriver. 5. Install the new bulb in the reverse order of removal. NOTE 2. Disconnect the bulb by pulling it out. An unsecured high-mount brake light will allow water to leak into the vehicle. Make sure the high-mount brake light is tightly fastened to the vehicle and if water still leaks, consult an Authorized Mazda Dealer. 8-34 Form No.8T50-EA-04G