2005 Mazda MPV Owner's Manual - Page 289

Mazda MPV_8T50-EA-04G_Edition1 Page289 Monday, June 28 2004 4:0 PM Black plate (289,1) Maintenance and Care Owner Maintenance 4. Remove the bulb by pushing it in slightly and turning it counterclockwise. NOTE Bulb replacement is not possible because it is built into the unit. Replace the unit. Parking lights Due to the complexity and difficulty of the procedure, the bulbs should be replaced by an Authorized Mazda Dealer. Brake lights/Taillights, Rear turn signal lights, Reverse lights, Taillights/Rearside marker lights 5. Install the new bulb in the reverse order of removal. Side turn signal lights 1. Slide the unit as shown in the figure to remove it. 2. Detach the electrical connector from the unit by pulling it to the rear. 1. Remove the bolts with a Phillips screwdriver and remove the rear combination component. 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconnect the bulb from the socket. Brake lights/Taillights Rear turn signal lights Reverse lights Taillights/Rear side-marker lights 3. Install the new side turn signal unit in the reverse order of removal. 4. Install the new bulb in the reverse order of removal. High-mount brake lights 1. Remove the liftgate upper trim. 8-33 Form No.8T50-EA-04G