2005 Mazda MPV Owner's Manual - Page 58
2005 Mazda MPV Manual
Page 58 highlights
Mazda MPV_8T50-EA-04G_Edition1 Page58 Monday, June 28 2004 3:59 PM Black plate (58,1) Essential Safety Equipment Child Restraint 1. If the seat in which you install a childrestraint system has a seat slide function, slide the seat as far back as possible. 2. Secure the child-restraint system with the lap portion of the lap/shoulder belt. See the manufacturer's instructions on the child-restraint system for belt routing instructions. 3. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor. 4. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. Adjust the angle of the seat belt buckle so that the belt is not loose. Clicking from the retractor will be heard during retraction if the system is in the automatic locking mode. If the belt does not lock the seat down tight, repeat this step. NOTE Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode. When you remove the child-restraint system, be sure the belt fully retracts to return the system to emergency locking mode before occupants use the seat belts. 5. If your child-restraint system requires the use of a tether strap, hook and tighten the tether strap by following the manufacturer's instructions. 2-46 Form No.8T50-EA-04G