1996 Mercury Sable Owner's Manual - Page 151

To reset the speed control to a higher speed, use one of the following procedures: u ACCEL - Press and hold the SET ACCEL u Depress the accelerator pedal. When the switch. Release the switch when the vehicle has accelerated to the desired speed. vehicle attains the desired speed, press the SET ACCEL switch and release it immediately. SET ACCEL switch. Each time you "tap" the switch, the set speed will increase by 1 mph (1.6 km/h). Multiple taps will cause the set speed to increase in increments of 1 mph (1.6 km/h). For example, if the current set speed is 55 mph (88 km/h) 5 taps of the SET ACCEL switch will increase the vehicle speed and SET it at 60 mph (96 km/h). u TAP-UP - Press and then quickly release the Cancelling and Resuming a Set Speed If you press the brake pedal, speed control is cancelled. You can return to the set speed by pressing the RESUME switch, as long as you did not press the OFF switch. You must be driving at least 30 mph (50 km/h). Your vehicle will gradually return to the previously set speed and then maintain it. To Turn Off the Speed Control System Press the OFF switch. In addition, the speed control is turned off each time you turn the vehicle off. 124