1997 Nissan Pathfinder Owner's Manual - Page 121

1) Move the selector lever into the "P" position. 2) Turn the ignition key slightly in the "ON" direction. 3) Turn the key toward the "LOCK" position. 4) Remove the key. If the key is removed from the ignition switch, the selector lever cannot be moved from "P" (Park). The selector lever can be moved if the ignition switch is in the "ACC" position. The selector lever can also be moved if the ignition switch is in the "ON" position and the foot brake pedal is depressed. There is an "OFF" position in between "LOCK" and "ACC", although it does not show on the lock cylinder. When the ignition is in "OFF" the steering wheel is not locked. In order for the steering wheel to be locked, it must be turned about 1/6 of a turn clockwise from the straight up position. To lock the steering wheel, remove the key. To unlock the steering wheel, insert the key and turn it gently while rotating the steering wheel slightly right and left. Never remove the key while driving. If the key is removed, the steering wheel will lock. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury. SSD0083 On automatic transmission models, the ignition lock is designed so that the key cannot be turned to "LOCK" and removed until the selector lever is moved to the "P" position. When removing the key from the ignition, make sure the selector lever is in the "P" position. If the selector lever is not returned to "P" (Park), the key cannot be moved toward LOCK. When the key cannot be turned toward the "LOCK" position, proceed as follows to remove the key: 4-6