1997 Nissan Pathfinder Owner's Manual - Page 96
1997 Nissan Pathfinder Manual
Page 96 highlights
Defrosting or defogging This mode is used to defrost/defog the windows. 1. Push the air recirculation button OFF. 2. Turn the air control dial to the " position. 3. (Manual mode) Turn on the fan control dial (1 to 3). (Auto mode) Turn the fan control dial to the AUTO position. ¼ The fan speed will be maintained automatically. 4. Turn the temperature control dial to the desired position. ¼ To quickly remove ice or fog from the windows, turn the fan control dial to "3" and the temperature control dial fully over to the "HOT" position. " 2. Turn the air control dial to the " tion. 3. (Manual mode) Turn on the fan control dial (1 to 3). (Auto mode) " posi- (Auto mode) Turn the fan control dial to the AUTO position. ¼ The fan speed will be maintained automatically. 4. Turn the temperature control dial to set the desired temperature. ¼ Adjust the temperature control dial to about 75°F (24°C) for normal operation. ¼ The temperature will be maintained automatically. Turn the fan control dial to the AUTO position. ¼ The fan speed will be maintained automatically. 4. Turn the temperature control dial to set the desired temperature. ¼ Adjust the temperature control dial to about 75°F (24°C) for normal operation. ¼ The temperature will be maintained automatically. Operating tips ¼ Clear snow and ice from the wiper blade and air inlet in front of the windshield. This will improve heater operation. AIR CONDITIONER OPERATION Start the engine, turn the fan control dial to the desired (Auto, 1 to 3) position and push in the air conditioner button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions will be added to the heater operation. The air conditioner cooling function operates only when the engine is running. Heating and defogging This mode heats the interior and defogs the windshield. 1. Push the air recirculation button OFF. 2. Turn the air control dial to the " tion. 3. (Manual mode) Turn on the fan control dial (1 to 3). " posi- Bi-level heating This mode directs outside air from the side and center vents and hot air from the floor outlets. 1. Push the air recirculation button OFF. 3-9