2010 Nissan Murano Owner's Manual - Page 157

LIFT GATE . inserting the mechanical key into the driver's door key cylinder and turning it to the rear of the vehicle twice. WARNING . Always be sure the lift gate has been closed securely to prevent it from opening while driving. Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle. See "EXHAUST GAS (carbon monoxide)" in the "5. Starting and driving" section of this manual. Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents. Always be sure that hands and feet are clear of the door frame to avoid injury while closing the lift gate. SPA2438 To close the lift gate, pull down until it securely locks. . OPERATING POWER LIFT GATE (if so equipped) To operate the power lift gate, the selector lever must be in the P (Park) position. The power lift gate will not operate if the battery voltage is low. . OPERATING MANUAL LIFT GATE To open the lift gate, unlock it and push the A opener switch * . Pull up the lift gate to open. The lift gate can be unlocked by: ...pushing the unlock button Intelligent Key twice. on the . pushing the lift gate request switch (if so equipped). pushing the door handle request switch twice (if so equipped). pushing the power door lock switch to the unlock position. Pre-driving checks and adjustments 3-19