2010 Nissan Murano Owner's Manual - Page 159
2010 Nissan Murano Manual
Page 159 highlights
Power open When the lift gate is fully closed, the lift gate will fully open automatically by: ...pushing the power lift gate switch the instrument panel pushing the lift gate opener switch A * the Intelligent Key for more than 1 second The hazard flashes 4 times and the outside chime sounds when the lift gate starts closing. motion will stop and the drive motor will disengage. The lift gate will enter the manual mode. A pinch sensor is mounted on each side of the lift gate. If an obstacle is detected by the pinch sensor during power close, the lift gate will reverse and return to the full open position immediately. NOTE: If the pinch sensor is damaged or removed, the power close function will not operate. on Reverse function The power lift gate will reverse immediately if one of the following actions is performed during power open or power close...pushing the power lift gate switch the instrument panel A * pushing the power lift gate on the Intelligent Key for more than 1 second B * C button * on The hazard flashes 4 times and the outside chime sounds when the lift gate starts opening. NOTE: The lift gate can be opened by the power A lift gate switch * or the lift gate button C * even if the lift gate is locked. The lift gate will individually unlock and open. Once the lift gate is closed, its lock will align to the vehicle's lock or unlock status. D pushing the lift gate switch * on the lower part of the lift gate pushing the lift gate button the Intelligent Key. C * on WARNING There is a small distance immediately before the closed position that cannot be detected. Make sure that all passengers keep their hands, etc., clear from the lift gate opening before closing the lift gate. The outside chime sounds when the lift gate starts to reverse. C The power lift gate button * on the Intelligent Key cannot be operated when the ignition switch is in the ON position. Power close When the lift gate is fully opened, the lift gate will fully close automatically by: ...pushing the power lift gate switch the instrument panel pushing the power lift gate switch the lower part of the lift gate pushing the lift gate release button A * D * C * Auto reverse function The auto-reverse function enables the lift gate to automatically reverse when something is caught in the lift gate as it is opening or closing. When the control unit detects an obstacle, the lift gate will reverse and return to the full open or full close position. If a second obstacle is detected, the lift gate Manual mode If power operation is not available, the lift gate can be operated manually. Power operation may not be available if multiple obstacles have been detected in a single power cycle or if the battery voltage is low. When the power lift gate main switch is in the OFF position, the lift gate can be opened manually by pushing the lift gate opener switch. If the power lift gate opener switch is Pre-driving checks and adjustments 3-21 on on on