2010 Nissan Murano Owner's Manual - Page 49
2010 Nissan Murano Manual
Page 49 highlights
4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. If you have any questions when installing a top tether strap child restraint on the rear seat, consult your NISSAN dealer for details. CHILD RESTRAINT INSTALLATION USING LATCH ing your fingers into the lower anchor area and feeling to make sure there are no obstructions over the LATCH anchors, such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the LATCH anchors are obstructed. Front-facing Follow these steps to install a front-facing child restraint using LATCH system: 1. Adjust the rear seatback to the upright position. 2. Position the child restraint on the seat. Always follow the child restraint manufacturer's instructions. SSS0645 Front-facing (webbing-mounted) - step 3 WARNING . Attach LATCH system compatible child restraints only at the locations shown. For the LATCH lower anchor locations, see "Lower Anchors and Te t h e r s f o r C H i l d r e n Sy s t e m (LATCH)" earlier in this section. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. The LATCH anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstance are they to be used for adult seat belts or harnesses. Inspect the lower anchors by insert- 3. Secure the child restraint anchor attachments to the LATCH lower anchors. Check to make sure the LATCH attachment is properly attached to the lower anchors. . . Safety - Seats, seat belts and supplemental restraint system 1-31