2010 Nissan Murano Owner's Manual - Page 399

INSTALLING FRONT LICENSE PLATE Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag...License plate bracket Bolt 6 2 Screw 6 2 Screw grommet 6 2 1. Park the vehicle on flat, level ground. B 2. Line up the tabs * on the license plate bracket under the top of the front bumper A * . Hold the license plate bracket in place. 3. Mark the center of the hole tip pen. C * with a felt- 4. Carefully drill two pilot holes using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) 5. Insert grommets into the hole on the fascia. 6. Install the license plate bracket with bolts. 7. Install the license plate with screws. STI0564 Technical and consumer information 9-11