2013 Nissan Sentra Owner's Manual - Page 109

MOONROOF (if so equipped) When the automatic operation for the driver's power window switch does not operate If the automatic operation for the driver's power window switch does not operate properly, perform the following procedure to initialize the power window switch. 1. Place the ignition switch in the ON position. 2. Press and hold the driver's window switch down until the window opens completely. 3. Release the switch. 4. Pull and hold the driver's window switch up to the second detent until the window glass has reached the full close position. Continue to hold the window switch in the up position for 5 seconds after the window glass has reached the full close position. (It is necessary for this entire step to be completed with one continuous pull of the window switch.) 5. Release the switch. Initialization is now complete. The automatic operation for the driver's power window switch should now operate. LIC2313 If the automatic operation does not operate properly after performing the above procedure, see a NISSAN dealer for assistance. No initialization is required for all the other window switches. AUTOMATIC MOONROOF The moonroof will only operate when the ignition switch is placed in the ON position. The automatic moonroof is operational for a period of time, even if the ignition switch is placed in the ACC or OFF position. If the driver's door or the front passenger's door is opened during this period of time, the power to the moonroof is canceled. Sliding the moonroof To fully open or close the moonroof, push the 2 or close ᭺ 1 position and switch to the open ᭺ release it; it need not be held. The roof will 2-40 Instruments and controls