2013 Nissan Sentra Owner's Manual - Page 193

FM/AM/SAT radio operation FM·AM button: Press the FM·AM button to change the band as follows: AM → FM1 → FM2 → AM If another audio source is playing when the FM·AM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing. The FM stereo indicator (ST) is shown on the screen during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. XM band select: Pressing the XM button will change the band as follows: XM1* → XM2* → XM3* → XM1* (satellite, if so equipped) When the XM button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the last station played. The last station played will also come on when the VOL/ON-OFF control knob is pressed to turn the radio on. LHA2262 LHA2303 Speed Sensitive Vol.: Controls the level to which the volume is adjusted as the vehicle's driving speed changes. Choose a setting or choose "0" to disable the feature entirely. AUX Volume Level: Controls the volume level of incoming sound when an auxiliary device is connected to the system. Available options are Low, Medium and High. XM settings: To view the XM settings: 1. Press the MENU button. 2. Select the "Settings" key. 3. Select the "XM" key. The signal strength, activation status and other information are displayed on the screen. 4-46 Monitor, climate, audio, phone and voice recognition systems