2013 Nissan Sentra Owner's Manual - Page 322

LDI2194 4 . 4. Push the release tab᭺ 5 and remove. 5. Move the wiper blade down᭺ LDI2195 8. Finally, pull the windshield wiper and washer lever for 5 seconds. This action will cause the wipers to resume the set position. 6. Insert the new wiper blade onto the wiper arm until it clicks into place. 7. Rotate the wiper blade so the dimple is in the groove. CAUTION ● After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened. ● Make sure the wiper blades contact the glass; otherwise the arms may be damaged from wind pressure. LDI2182 If you wax the surface of the hood, be careful not A . This may to let wax get into the washer nozzle ᭺ cause clogging or improper windshield-washer operation. If wax gets into the nozzle, remove it B. with a needle or small pin ᭺ Maintenance and do-it-yourself 8-19