2013 Nissan Sentra Owner's Manual - Page 85

Low windshield-washer fluid warning light This light comes on when the windshield-washer fluid is at a low level. Add windshield-washer fluid as necessary. See "Windshield-washer fluid" in the "Maintenance and do-it-yourself" section of this manual. NISSAN Intelligent Key® warning light (if so equipped) The Intelligent Key warning light illuminates green when the ignition switch can be turned. The Intelligent Key warning light illuminates red when the ignition switch cannot be turned. The Intelligent Key warning light blinks red if the Intelligent Key is taken outside of the vehicle while the ignition switch is placed in the ACC or ON position. ● If the Intelligent Key warning light blinks, make sure of the location of the Intelligent Key as soon as possible. The Intelligent Key should be carried by the driver while operating the vehicle. ● The Intelligent Key warning light turns off about 10 seconds after the Intelligent Key is brought inside the vehicle. The Intelligent Key warning light blinks green indicating that the Intelligent Key battery is almost discharged. See "NISSAN Intelligent Key®" in the "Predriving checks and adjustments" section. P position selecting warning light (CVT models) (if so equipped) The light blinks red and the warning buzzer sounds if you are outside of the vehicle with the Intelligent Key and the engine is off, but the shift selector is not in the P (Park) position. When the warning light blinks, place the ignition switch in the ON position, move the shift selector to the P position, then place the ignition switch in the LOCK position. NISSAN Intelligent Key® lock warning light (M/T models) (if so equipped) When the ignition switch is left in the OFF position instead of completely placing it to the LOCK position, the Intelligent Key lock warning light blinks red and the Intelligent Key room buzzer will sound. The light will keep blinking until the ignition switch is placed in the LOCK or ACC position. If the Intelligent Key lock warning light blinks and the buzzer sounds, press the PUSH release button next to ignition knob, then turn the ignition knob to either the LOCK or ACC position. See "NISSAN Intelligent Key®" in the "Predriving checks and adjustments" section. Power steering warning light WARNING ● If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering warning light illuminates with the engine running, there will be no power assist for the steering. You will still have control of the vehicle but the steering will be harder to operate. Have the power steering system checked by a NISSAN dealer. 2-16 Instruments and controls