2013 Nissan Sentra Owner's Manual - Page 165
2013 Nissan Sentra Manual
Page 165 highlights
● When the position is selected, the air conditioner automatically turns on (the indibutton will come on) cator light on the if the outside temperature is more than 36°F (2°C). This dehumidifies the air which helps mode audefog the windshield. The tomatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. 2. Turn the fan control dial to the desired position. 3. Turn the temperature control dial to the desired position between the middle and the hot position. position is selected, the air ● When the conditioner automatically turns on if the outside temperature is more than 36°F (2°C). The indicator light on the A/C button will come on. This dehumidifies the air which helps defog the windshield. The mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. The air conditioner cooling function operates only when the engine is running. Cooling This mode is used to cool and dehumidify the air. 1. Press the 2. Press the button to the OFF position. air flow control button. 3. Turn the fan control dial to the desired position. 4. Push the comes on. button. The indicator light Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. 1. Press the 2. Press the button to the OFF position. air flow control button. 5. Turn the temperature control dial to the desired position. ● For quick cooling when the outside tembutton to perature is high, push the the ON position. Be sure to return the to the OFF position for normal cooling. MAX A/C may be used for quick cooling. Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. AIR CONDITIONER OPERATION (if so equipped) Start the engine, turn the fan control dial to the button to desired position, and press the activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation. Dehumidified heating This mode is used to heat and dehumidify the air. 1. Press the 2. Press the button to the OFF position. air flow control button. Heating and defogging This mode heats the interior and defogs the windshield. 1. Press the air flow control button. 3. Turn the fan control dial to the desired position. 4-18 Monitor, climate, audio, phone and voice recognition systems