2014 Nissan Rogue Owner's Manual - Page 205

BREAK-IN SCHEDULE S35-D-110201-5AF1C016-DF79-45EE-9EC9-6B7A1E7369A1 FUEL EFFICIENT DRIVING TIPS GUID-C42274A7-64A7-4894-9A57-1740825CE5AB - If you move the shift lever to the N (Neutral) position, the cruise control will be canceled. To reset at a faster cruising speed, use one of the following methods: . Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch. . Push and hold the ACCEL/RES switch. When the vehicle attains the desired speed, release the switch. . Push, then quickly release the ACCEL/RES switch. Each time you do this, the set speed will increase by about 1 MPH (1.6 km/h). To reset at a slower cruising speed, use one of the following methods: . Lightly tap the brake pedal. When the vehicle attains the desired speed, push the COAST/SET switch and release it. . Push and hold the COAST/SET switch. Release the switch when the vehicle slows down to the desired speed. . Push, then quickly release the COAST/SET switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). To resume the preset speed, push and release the ACCEL/RES switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h). CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance. . Avoid driving for long periods at constant speed, either fast or slow. Do not run the engine over 4,000 rpm. Do not accelerate at full throttle in any gear. Avoid quick starts. Avoid hard braking as much as possible. Do not tow a trailer for the first 500 miles (800 km). Your engine, axle or other parts could be damaged. Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. 1. Use smooth accelerator and brake pedal application. . Avoid rapid starts and stops. . Use smooth, gentle accelerator and brake application whenever possible. . Maintain constant speed while commuting and coast whenever possible. 2. Maintain constant speed. . Look ahead to try and anticipate and minimize stops. . Synchronizing your speed with traffic lights allows you to reduce your number of stops. . Maintaining a steady speed can minimize red light stops and improve fuel efficiency. 3. Use air conditioning (A/C) at higher vehicle speeds. . Below 40 MPH (64 km/h), it is more efficient to open windows to cool the vehicle due to reduced engine load. . Above 40 MPH (64 km/h), it is more efficient to use A/C to cool the vehicle due to increased aerodynamic drag. ... Starting and driving 5-19