2014 Nissan Rogue Owner's Manual - Page 275

5 * 6 * hours, or driven less than 1 mile (1.6 km) at moderate speeds. The recommended cold tire inflation is set by the manufacturer to provide the best balance of tire wear, vehicle handling, driveability, tire noise, etc., up to the vehicle's GVWR. Tire size - see "Tire labeling" (P.832). Spare tire size or compact spare tire size (if so equipped) SDI1949 tion shown on the Tire and Loading Information label. 5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. 6. Install the valve stem cap. 7. Check the pressure of all other tires, including the spare. Checking the tire pressure GUID-35F5460B-53F3-48BD-8D36-DF9B4793C040 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove the gauge. 4. Read the tire pressure on the gauge stem and compare it to the specifica- SIZE FRONT P215/70ORIGINAL R16 99H TIRE REAR ORIGINAL TIRE SPARE TIRE P215/70R16 99H T155/90D16 COLD TIRE INFLATION PRESSURE 230 kPa, 33 PSI 230 kPa, 33 PSI 420 kPa, 60 PSI Maintenance and do-it-yourself 8-31