1997 Pontiac Grand Prix Owner's Manual - Page 326

Using Foam-Vpe Cleaner on Fabric 1. Vacuum and brush the area to remove any loose dirt. Using Solvent-Type Cleaneron Fabric First, see if you have to use solvent-type cleaner at all. Some spots and stains will clean off better with just water and mild soap. 2. Always clean a whole trim panel or section. Mask surrounding trim along stitch or welt lines. 3. Mix Multi-Purpose Powdered Cleaner following the directions on thecontainer label. 4. Use suds only and apply with a clean sponge. Don't saturate the material and don't rub it roughly. 5 . As soon as you've cleaned the section, use a sponge to remove the suds. 6. k n s e the section with a clean, wet sponge. 7. Wipe off what's left with a slightly damp paper towel or cloth. If you need to use a solvent: 1. Gently scrape excess soil from the trim material with a clean, dull knife or scraper. 2. Use very little cleaner, light pressure and clean cloths (preferably cheesecloth). Cleaning should start at the outside of the stain, "feathering" toward the center. 3. Keep changing to a clean section of the cloth. fiom dry 4. When you clean a stain fabric, immediately the area with a blow dryer to help preventa cleaning ring. 8. Dry it immediately with a blow dryer. 9. Wipe with a clean cloth. 6-56