1997 Pontiac Sunfire Owner's Manual - Page 82
1997 Pontiac Sunfire Manual
Page 82 highlights
Here's how to operate your transaxle:, NEUTRAL (N): Use this position when you start or idle your engine. FIRST (1): Press the clutch pedal and shift into mRST (I). Then, slowly let up on the clutch pedal as you press the accelerator pedal. You can shift into FIRST (1) when you're going less than 20 mph (32 km/h). If you've come to a complete stop and it's hard to shift into FIRST (l),put the shift lever i NEUTRAL (N) and let up on the clutch. Press n the clutch pedal back down. Then shift into FIRST (1). REVERSE (R): To back up, press down the clutch pedal and shift into REVERSE (R). Let up on the clutch pedal slowly while pressing the accelerator pedal. ITICE: Shift to REVERSE (R) only after your vehicleis stopped. Shifting to REVERSE (R) while your vehicle is moving could damage your transaxle. SECOND (2): Press the clutch pedal as you let up on the accelerator pedal and shift into SECOND (2).Then, slowly let up on the clutch pedal as you press the accelerator pedal. THIRD (3), FOURTH (4) and FIFTH (5): Shift into THIRD ( ) FOUWTH (4) AND FIFTH (5)' the same 3, way you do for SECOND (2).Slowly let up on the clutch pedal as you press the accelerator pedal. To stop, let up on the accelerator pedal and press the brake pedal. Just before the vehicle stops, press the clutch pedal and the brake pedal, and shift to NEUTRAL (N). Also, use REVERSE (R), dong with the parking brake, for parking your vehicle. 2-24